Laminated Glass Cutting Table - LK
After the glass sheet is loaded, the operator moves the glass sheet to the cutting bridge manually. Positioning and aligning the sheet to the cutting table is performed by entering the dimension of the glass. After the dimension is given, the machine will automatically position the glass for cutting. Afterwards, by the command of the operator the machine starts cutting process. Stop rollers are built in the table top of the downstream air cushion or breaking table. Two jointly driven cutting heads place the cut on the upper and lower surfaces of a laminated glass sheet simultaneously. Following cutting the heating resistances come up and heat the PVB material. After enough time of heating, the upper and lower cutting lines are broken open with a separate breaking roller system respectively. | Technical data | LK6000 | LK4600 | LK3800 | | Minimum Glass Size | 350mm | 350mm | 350mm | | Maximum Glass Size | 6000mm | 4600mm | 3800mm | | Minimum Glass Thickness | 3+PVB+3 | 3+PVB+3 | 3+PVB+3 | | Maximum Glass Thickness | 8+PVB+8 | 8+PVB+8 | 8+PVB+8 | | Maximum Cutting Speed | 20 m/min | 20 m/min | 20 m/min |
Video: https://www.youtube.com/watch?v=5cGLhLBHGoY https://www.youtube.com/watch?v=_fSayuqUvU4 | 
