Cтеклообрабатывающее оборудование
Glass Machines
equipment for automatic glass cuttingtriplexglass packagesbending and temperingglass drilling machinesglass washing machinesWaterjet cutting glassSandblasting MachinesSpare PartsDiamond ToolsRelated GoodsServiceAbout USContact USGlass Machines
Русская версия

↑ LOOK ↑
Laminated Glass Cutting Table - LK

After the glass sheet is loaded, the operator moves the glass sheet to the cutting bridge manually. Positioning and aligning the sheet to the cutting table is performed by entering the dimension of the glass. After the dimension is given, the machine will automatically position the glass for cutting. Afterwards, by the command of the operator the machine starts cutting process. Stop rollers are built in the table top of the downstream air cushion or breaking table. Two jointly driven cutting heads place the cut on the upper and lower surfaces of a laminated glass sheet simultaneously. Following cutting the heating resistances come up and heat the PVB material. After enough time of heating, the upper and lower cutting lines are broken open with a separate breaking roller system respectively.
Technical data LK6000 LK4600 LK3800 
Minimum Glass Size  350mm350mm 350mm 
Maximum Glass Size 6000mm 4600mm 3800mm 
Minimum Glass Thickness 3+PVB+3 3+PVB+3 3+PVB+3 
Maximum Glass Thickness  8+PVB+88+PVB+8 8+PVB+8 
Maximum Cutting Speed 20 m/min20 m/min 20 m/min 







← Diamond Tools for this equipment for automatic glass cutting:
Laminated Glass Cutting Table - LK

← All Spare Parts for this equipment for automatic glass cutting:
Laminated Glass Cutting Table - LK
MAIN → | РУССКАЯ ВЕРСИЯ →                 ©2012 - 2022 STANKI 54
MAIL | ↑ PAGE UP ↑                               WebDeveloper CopylenCompany